Tips for Increasing Photovoltaic Power Generation
1. Select High - efficiency Photovoltaic Modules
2. Design the Optimal Tilt Angle
When installing outdoors, install a rain – proof and sun – proof canopy above the inverter to avoid direct sunlight and water immersion.
3. Avoid Direct Sunlight
In the specification parameter table of lithium batteries, “S” represents series connection (String), and “P” represents parallel connection (Parallel). Batteries (cells) increase the voltage through series connection and increase the discharging current through parallel connection.
4. Optimize the Ventilation Environment
For electrical equipment such as inverters, choose products with good heat – dissipation performance. At the same time, optimize the ventilation environment during the design and layout.
5. Regularly Clean Photovoltaic Modules
Clean the modules in a timely manner to remove pollutants such as dust and dirt on the surface, and maintain the high light transmittance of the modules.
6. Strengthen Equipment Maintenance
Regularly inspect whether there are any faults in equipment such as photovoltaic modules, inverters, distribution box cables, etc., and replace relevant equipment products in a timely manner.
7. Establish a Data Detection System
By installing data monitoring equipment, real – time monitor data such as the operating status and power generation of the power station, providing a scientific basis for operation and maintenance management.